Courtier Accessories
The Impey Courtier range also includes an extensive range of accessories designed to improve and complete your showering experience.
If you require further assistance or can’t find what you
need please call us on 0870 909 0770 and we’ll be happy to help.
A tiled floor looks good, is hard wearing, hygienic and practical. It’s the natural choice and an elegant solution for all bathrooms and en-suites. With the Devimat®100 heating system under your tiles they will become warm and pleasant to walk on.
The system offers more than just warmth and comfort, its energy efficient, with running costs much lower than you may expect. The mat design also ensures a quick and simple installation.
As well as a comfortable warm floor, the heat generated from a Devimat®system will drift upwards and contribute to the room temperature. The heating effect of any existing heating system can be reduced with corresponding energy savings, but the devimat should not be relied upon as a primary source of heating.
Ordering the Devimat®100 couldn’t be simpler, simply work out the area you need to cover, excluding any floor obstructions like baths or sinks. Then choose the closest size of mat available below your measurement. See sizing calculator opposite.
THE DEVIMAT®100
The Devimat®100 is a self-adhesive mesh with an ultra-thin heating cable pre-attached which is just 3.5mm thick. The mat design not only enables a fast installation, but as the heating cables are already spaced out on the mesh an even heat is guaranteed across the whole floor, with no cold ripples. As the mat is so thin, it can be installed within the thickness of the tile adhesive adding no appreciable height to the floor. The mat is 500mm wide and is available in various lengths.
DEVIREG 550
This controller is a combined thermostat and timer which fits into a standard 47mm single socket box. The 550 is programmed to monitor the floor temperature using a floor sensor which is supplied with the controller and Devimat®100. The 550 is designed to be user friendly and incorporates a ‘one button does it all’ technology. Each day can be programmed individually to switch on when required thus ensuring minimal running costs.
SAFETY
The Devimat® heating cable meets the highest UK and European standards and is the only thin heating cable with a complete aluminium earth sheathing. The earth sheathing that surrounds the heating conductor is there for your protection and safety and is essential when installing in your bathroom or wet room.
The free area where the floor heating is to be fitted must be measured to determine which size DevimatŪ is needed.
A groove is cut into the floor and wall approximately 10mm deep and wide for the floor sensor and tube. The tube allows for easy removal of the floor sensor if required.
Before laying the self adhesive mat, the existing floor should be clean and dry, primed if necessary. Once the mat has been tested, it is then rolled out and laid on the floor.
Upon reaching the end of a mat run, simply cut the mesh, turn the mat and lay the next piece beside the first. The red heating cable must NOT be cut.
Lay tile adhesive and tiles in one operation. A flexible tile adhesive and grout should always be used.